Panasonic AW-RP50N Setting the USER buttons, Registering functions in the USER buttons, 1USER

Setting the USER buttons

Menu items can be assigned to the two USER buttons (USER1, USER2).

After assigning an item, the assigned menu item can be displayed simply by pressing one of these USER buttons (USER1 or USER2).

	F1
	F2
POWER ALARM	F1	CAMERA
		OSD

		1	2	3	4	5
MENU	PAGE	GAIN/PED	R/B GAIN	R/B PED	AWB/ABB	SHUTTER	F2	EXIT
		6	7	8	9	10
STORE	DELETE	DETAIL	SCENE/MODE	CAMERA	SETUP	SYSTEM	USER1	USER2
			PRESET MEMORY / MENU

Menu item	Details of operation performed
SWLINK	This enables the link between the unit and
	switcher.
BUSCONT	This is the bus switching setting.
FASIST	This sets the focus assist function.
CAMSEL	This displays icons at the bottom left of the
	images from the remote camera selected by the
	unit on the multi view display of the switcher.
TALLY	This sends the tally information sent periodically
	by UDP from the switcher to the remote camera.
CAMINF	This sends the camera information of the remote
	camera selected to the switcher.
AWB	AWB is executed when the USER button, in which
	AWB has been assigned, is pressed.
	When AWB is executed successfully, the indicator
	of the button goes off; conversely, when it is not
	executed successfully, it blinks.
ABB	ABB is executed when the USER button, in which
	AWB has been assigned, is pressed.
	When ABB is executed successfully, the indicator
	of the button goes off; conversely, when it is not
	executed successfully, it blinks.
POWER OFF	When the USER button in which POWER OFF
	has been assigned is pressed, the indicator of
	the button lights for an instant, and power OFF is
	requested for all the remote cameras connected.

￿￿Registering functions in the

USER buttons

1Set the MENU button to ON.

Press the MENU button to light its indicator.

2Set the PRESET MEMORY/MENU 9 button (SETUP) to ON.

When the button is pressed and its indicator lights, the [SETUP] menu is displayed on the LCD panel.

[1]USER ▼

3Press the F1 dial.

4Turn the F1 dial to display [USER1] or [USER2].

1.USER1 ▼

SWLINK

5Turn the F2 dial to select the item to be assigned, and press the F2 dial.

1.USER1 ▼

SWLINK

Turn the F2 dial, and then press it.

1.USER1 ▼

BUSCONT

16