Manuals / Panasonic / Household Appliance / Home Security System

Panasonic AW-RP50N Auto IP setting, Changing the IP addresses, Changing the camera numbers

Models: AW-RP50N

1 82

Download 82 pages 17 Kb

Page 39

Auto IP setting

RP setting tool

Auto IP setting

When IP addresses are to be changed

1Click [RENEW].

New IP addresses are set in the target remote cameras and switcher.

When [CANCEL] is clicked, the original settings are restored.

2Check that the IP addresses of the remote cameras and switcher are displayed correctly, and click [SET].

The IP addresses which have been set now take effect.

When IP addresses are not going to be changed

1Click [KEEP].

The IP addresses of the target remote cameras and switch are displayed.

When [CANCEL] is clicked, the original settings are restored.

2Check that the IP addresses of the remote cameras and switcher are displayed correctly, and click [SET].

The displayed IP addresses now take effect.

Changing the IP addresses

The IP addresses of the remote cameras and switcher can be changed.

1Directly input the IP address of the device concerned into the [IPAddress] field.

2Click [SET].

The changed IP address now takes effect.

Changing the camera numbers

The camera numbers set for the remote cameras can be changed.

1Change the camera number for the remote camera concerned in the [CAMERA Select] field.

2Click [SET].

The changed camera number now takes effect.

Registering the camera numbers in the switcher’s input connectors

Set the camera numbers to be registered for the input connectors (SDI IN 1 to SDI IN 4, DVI IN) of the switcher.

1Select the camera numbers to be registered in the [SW Input] field.

SW Input display	Input connector of switcher
Input1	SDI IN 1
Input2	SDI IN 2
Input3	SDI IN 3
Input4	SDI IN 4
Input5	DVI IN

2Click [SET].

The registration of the camera numbers into the input connectors of the switcher now takes effect.

39

Image 39

Panasonic AW-RP50N Auto IP setting, Changing the IP addresses, Changing the camera numbers, 1Click RENEW, 1Click KEEP

Contents

Operations and Settings Operating InstructionsRemote Camera Controller Model No. AW-RP50NOperating the menu items of the selected remote ContentsHow to turn the power of the remote cameras on Selecting the settings for a selected remoteConcerning the Operating Instructions Network-relatedprecautionsBefore use Overview1Set the MENU button to ON How to turn the power of the remote cameras on2Set PRESET MEMORY/MENU 8 button CAMERA to ON 1Select the remote cameraMemo Setting and operating the preset memoriesRegistering data in the preset memories 3Press the STORE buttonSetting and operating the preset memories Executing the preset dataDeleting the preset memory data 1Press the DELETE button3Turn the F2 dial to select the setting Setting the gainSetting the pedestal 3Turn the F1 dial to select the settingRPED Setting the R and B gain valuesSetting the R and B pedestal RGAIN ±000 BGAIN ±0001Set the MENU button to ON Setting the white balanceSelecting the white balance mode AWB MODE AWB B1Set the MENU button to ON Automatically adjusting the white balanceAWB MODE AWB A Memo3Set the MENU button to ON 3Turn the F1 dial to select ATW1Set the MENU button to ON 2Set the MENU button to ON Setting the black balanceAutomatically adjusting the black balance Manually adjusting the black balance3Turn the F1 dial to select the shutter mode Setting the shutter speedSetting the detail 2Set the PRESET MEMORY/MENU 6 button DETAIL to ONSCENE MANU1 MODE CAM Setting the shooting modeSpecifying the color bars 3Turn the F1 dial to select the shooting modeCursor movements Table of operationsRemote camera Menu ON/OFF3Press the F1 dial Setting the USER buttons2Set the PRESET MEMORY/MENU 9 button SETUP to ON Registering functions in the USER buttons1.PAN DIR Setting the functions4Turn the F1 dial to select the target menu item 4OPERATESetting the zooming direction Setting the remote camera operationsSetting the panning direction Setting the tilting directionSetting the functions 5.SPEED WITHZ Off6.SPEED TARGET R/T/Z/F P/T/Z/FSetting the functions Setting the PAN/TILT lever inclination and speed7.FOCUS/IRIS NORMAL 8.P/T CURVMode 1.DIAG SPEED2.SCOPE MODE A Setting the functions3.LIMIT UP Off Setting the upper limitSetting the lower limit Display that appears with the AW-HE505.LIMIT LEFTOn Setting the left limitSetting the right limit 5.LIMIT LEFTOffSetting the functions 3.HOMEPOSITION SETControlling an AC adapter AW-PS300A 6FUNCTIONControlling an ND filter 1.ND FILTEROff2.Z MIN SPEED Adjusting the minimum pan/tilt start speedAdjusting the minimum lens zoom start speed 1.P/T MIN SPEED STARTLocking the button operations Setting the preset numbersSetting button operation enable or disable 1.MENU CONTROL ENABLE1Set the MENU button to ON Linking the unit with the switcherSwitcher network settings 2Set PRESET MEMORY/MENU 10 button SYSTEM to ON1.INPUT1 CAM1 Setting the image output and image input1CAMERA CTL 3SW ASSIGN1Set the MENU button to ON Switcher settings2Set PRESET MEMORY/MENU 9 button SETUP to ON Linking the unit with the switcher3.BUS AUX Bus settingFocus assist setting Camera information setting7.P/T LEVER OA tally settingPAN/TILT lever control setting 6.TALLY IP Off1Set the MENU button to ON Setting all the information displays togetherLinking the unit with the switcher 2Set PRESET MEMORY/MENU 9 button SETUP to ONVideo format Setting each information item to be displayedRemote camera alarm information 9.ALARM OffNO ALARM Checking the equipment alarm information8ALARM 1.POWER NO ALARMSETUPSETTING Set PRESET MEMORY/MENU 10 button SYSTEM to ON5Press the F2 dial to initialize the settings 1.INITIALIZE SETUPExample of GPI Out connections Control interface for external devicesTALLY/GPI D-sub 15-pin,female, inch threadSoftware provided on the CD-ROM RP setting toolInstalling the software IP settings1Click RENEW Auto IP settingChanging the IP addresses Changing the camera numbersAcquiring information Alarm displaysDisplaying the camera names Initializing the IP addressesRP setting tool Saving the setting filesSaving and loading data 2Input the filename, and click Save2Select the file, and click Open Loading the setting filesSaving the log files 1Click FileMenu item Table of menu itemsSetting ButtonMenu item SettingTable of menu items ButtonMenu item SettingTable of menu items ButtonMenu item SettingTable of menu items ButtonF0410Y0 Operating Instructions Basics Remote Camera ControllerModel No. AW-RP50N THIS APPARATUS MUST BE EARTHED Safety precautionsIMPORTANT SAFETY INSTRUCTIONS Safety precautionsindicates safety information Operating precautions Network-relatedprecautionsAccessories Installation precautionsConcerning the Operating Instructions Network-relatedprecautionsBefore use OverviewIP connection CharacteristicsCompact design IP connection and serial connection supportedAccessories Pan-tiltheads and cameras supportedPan-tiltheads supported Required personal computer environment Handle carefully Installation precautionsConnecting the power supply Choosing the best installation locationAvoid humidity and dust Operating precautionsWhen the product is to be discarded Handle carefullyControl panel POWER indicator POWERALARM indicator ALARM Parts and their functionsUSER buttons USER1, USER2 PRESET MEMORY/MENU buttons PRESET MEMORY/MENUCAMERA OSD button CAMERA OSD EXIT button EXITButton indicator ON Auto iris Button indicator ON Auto focusingButton indicator OFF Manual focusing When it is turned clockwiseLAN connector LAN RJ-4510BaseT/100BaseTX POWER switch POWERGround terminal SIGNAL GND SERVICE switch SV/NM6Adjust the focus 1Turn on the unit’s power4Adjust the zoom 5Adjust the lens irisBasic operations for the menus Select the target menuSet the MENU button to ON 7Press the F2 dial, and change the setting Network settingsSetting the unit 6Turn the F2 dial, and select the settingSetting the MAC address Setting the IP addressSetting the subnet mask Setting the default gatewaySDI video signal ConnectionsExample of IP connections Connections with the AW-HE50and AW-HS50Connections Example of serial connectionsConnection with the AW-HE50 Connection with the AW-HE100Zoom lens Connections with the AW-PH400and cameraSwitch settings Connections10BASE-TUTP category 5 straight cable Connections with the AW-PH405and cameraConnections Zoom lens10BASE-TUTP category 5 straight cable Connection with the AW-PH650Connections RJ-45relay adapter1.CAM1 Serial Settings for connection with the remote camerasSerial connection IP connectionWhen setting the IP addresses for the first time 2 On the SYSTEM menu, select AUTO SETConnections C 20/20 S 1/1 C/S OVER! YES SET UP IP tttttSET UP IP COMPLETE SET UP IP SET UP ERRMemo 1.AUTO SETUP KEEPConnections 2 On the SYSTEM menu, select AUTO SETSET UP IP SET UP ERR SET UP IP IP DuplicateERRSET UP IP ttttt SET UP IP COMPLETE1.GROUP SELECT Setting the IP addressesChanging the IP addresses of the remote cameras Selecting the camera group3Press the F2 dial to enter the IP address Changing the IP address of the switcherChanging the camera numbers Clearing the IP address control tables3Press the F1 dial 2Set the PRESET MEMORY/MENU 8 BUTTON CAMERA to ONSelecting the remote cameras to be operated 1Set the MENU button to ONto cool down Maintenance210 8-1/4 AppearanceUnit mm inch 189 7-7/16Power consumption DC 12 V, 0.5 A SpecificationsInput/Output connector Power requirements: DC 12 V 10 %F0410Y0