4. MENU OPERATION
Locking the control unit
The LOCK feature renders the following commands inoperative from the control unit at which the LOCK feature has been actuated.
•Menu operation
•Changing the steering mode
•Course setting
•Waypoint switching
1.Rotate the [ENTER] knob to select “LOCK” from the SYSTEM SETUP menu.
2.Press the [ENTER] knob to show the lock options window.
UNLOCK
LOCK
Lock options window
3.Rotate the [ENTER] knob to select “LOCK” or “UNLOCK” as appropriate.
4.Press the [ENTER] knob.
To unlock, press the [STBD] (►) key while holding the [MENU] key down.
Selecting language
Select the language to use, from between English and some European languages.
1.Rotate the [ENTER] knob to select “LANGUAGE” from the SYSTEM SETUP menu.
2.Press the [ENTER] knob to show the language options window.
3.Rotate the [ENTER] knob to select the language desired.
4.Press the [ENTER] knob.
Setting the panel dimmer
You can adjust the control panel dimmer as follows.
1.Rotate the [ENTER] knob to select “PANEL DIMMER” from the SYSTEM SETUP menu.
2.Press the [ENTER] knob and the current value is circumscribed with a double rectangle.
3.Rotate the [ENTER] knob to set value (Setting range: 1 to 8). The higher the number the greater the illumination.
4.Press the [ENTER] knob.
