Furuno NAVpilot-500 manual Processor Unit Test, Controller Unit Test, Heading Sensor Test

6.MAINTENANCE & TROUBLESHOOTING

PROCESSOR UNIT TEST

PROCESSOR UNIT

ROM		OK
No.	6454002-**.**
RAM		OK
EEPROM		OK
RUDDER ANGLE		OK
CLUTCH/BYPASS		OK

REMOTECONTROLLER1 ON 1

REMOTECONTROLLER2 NOT USED

INPUT VOLTAGE	24.8 V
HEADING SENSOR	- -
PORT1	- -
PORT2	- -
RS232	- -

For factory setting

**.**: Program version no.

CONTROLLER UNIT TEST

CONTROLLER UNIT

ROM	OK
No.	6454001-**.**
RAM	OK
COMUNICATION	OK
EEPROM	OK

CONTROLLER ID

**.**: Program version no.

HEADING SENSOR TEST

This test should be done while turning the connected sensor (PG-500) in a circle with 3°/sec. or more. If the sensor is not rotate, this test terminates after one minute with NG result.

HEADING SENSOR

ROM	OK
No.	6454101-**.**
RAM	OK
EEPROM	OK
SENSOR	OK
RATE SENSOR	OK

**.**: Program vrsion no.

6-3