2. BASIC OPERATION

2-3

2.3 Adjusting Brilliance and Contrast
The brilliance and contrast can be adjusted as below:
1. Momentarily press the [POW ER/BRILL] key. The CONTRAST and BRILL
window appears.
CONTRAST
BRILL
10
8
PORT STBD
Contrast, brilliance window
2. Rotate the [ENTER] knob to adjust display con trast; clockwise to raise the
contrast and counter-clockwise to lower it. (16 levels are available.)
The contrast can also be adjusted by pressing the [POWER/BRILL] key.
3. Press the [PORT] or [STBD] key to adjust display brilliance, [PORT] to lower
the brilliance and [STBD] to raise it. (Eight levels are available.)
To close the CONTRAST and BRILL window, press any key except the
[POWER/BRILL], [STBD] or [PORT] key.
2.4 Displays
There are four types of displays: Normal display 1, Normal display 2, Graphic
display and Data display.
To choose a display mode, press a mode key (AUTO, NAV, STBY). Each time a
mode key is pressed the display changes in the sequence shown below.
HDG
(Mode) (Course)
(Heading)
(Data)
PS
Heading mode
HDG
(Mode) (Course)
(Heading)
Heading mode
(Data1)
(Data 2)
PS
(Data)
(Normal display 1)
HDG
(Graphic)
Heading mode
(Mode)
(Course)
(Graphic display)
HDG
(Mode)
(Course) (Heading)
Heading mode
(Data1)
(Data 2)
(Data display)
(Normal display 2)
Analog indicator
Displays