2. BASIC OPERATION
2-6 Selecting the display layout for Data Display
You can show two or three data on the Data Display.
HDG
STBY
20.4
116.5
(Data1)
(Data 2)
Data display, two data
HDG
STBY
20.4
116.5
(Data1)
(Data 2)
Data display, three data
(Data 3)
Data Displays
1. Open the SCREEN SETUP menu referring to page 2-4.
2. Rotate the [ENTER] knob to select “SCREEN 3 PATTERN.
3. Press the [ENTER] knob to show the screen 3 options window.
2 DATA
3 DATA
Screen 3 pattern options window
4. Rotate the [ENTER] knob to select 2 DATA or 3 DATA as appropriate.
5. Press the [ENTER] knob.
6. Press the [ENTER] knob to close the m enu.
Selecting data for Data Display
You may choose which data to show on the Data Display. Data 3 is available
only when you select 3DATA at “SCREEN 3 PATTERN” shown above.
1. Open the SCREEN SETUP menu referring to the page 2-5.
2. Rotate the [ENTER] knob to select “DATA 1”, “DATA 2” or “DATA 3”.
3. Press the [ENTER] knob show the option wind ow.
The contents are same as the table shown on the previous page.
4. Rotate the [ENTER] knob to select data.
5. Press the [ENTER] knob.
6. Press the [MENU] key to close the menu.