Breville The Custom Loaf, BBM800XL manual Plug in the Power Cord, Select the Setting

OPERATING YOUR BREVILLE BREAD MAKER - BEGINNER’S GUIDE

a)Ensure the bread pan is in the baking chamber.

b)Lift open the lid of the main stainless steel housing. The base of the Automatic Fruit and Nut Dispenser can be identified by the row of steam vents. Push in the base until it clicks into place. Close the main stainless steel housing lid.

c)Lift open the lid of the Automatic Fruit and Nut Dispenser then add a maximum ¾ cup of dry ingredients. Always remember:

−−Ingredients should be suitably sized so they do not fall through the steam vents at the base of the dispenser. We recommend separating ingredients that may stick together, such as raisins and other fruits, before adding.

−−Liquids should not be added to the dispenser.

−−Glace (glazed) fruits such as cherries, ginger, pineapple; and bottled or canned ingredients such as olives and sun dried tomatoes etc. should be washed and thoroughly dried on kitchen paper towel before adding into the dispenser.

−−It is recommended that the dispenser be cleaned thoroughly with a soft, damp cloth after each use.

d)The Fruit and Nut Dispenser will automatically release its contents on the BASIC, BASIC RAPID, WHOLE WHEAT, WHOLE WHEAT RAPID, GLUTEN FREE,

CRUSTY LOAF, SWEET, YEAST FREE and all DOUGH settings. You may notice the base of the dispenser flip open during the bread making cycle even when it is empty. This is normal. It is the dispenser automatically releasing ingredients 8 minutes before the end of the ‘knead 2’ phase, regardless of whether it has been loaded.

TIP

If ingredients exceed the maximum ¾ cup capacity of the dispenser, lift open the lid and add ingredients manually when the ‘add-in’ alert sounds 8 minutes before the end of the ‘knead 2’ phase. Ensure the BEEPER button has not been muted and the sound alerts are on - there should be no symbol on the LCD screen. Do not press and hold the CANCEL button to add ingredients as this will cancel the entire cycle.

6. Plug in the Power Cord

a)Unwind the power cord completely and insert the power plug into a grounded power outlet.

b)An alert will sound and the LCD screen will illuminate. The function options will appear with an indicator on the preset BASIC setting.

7. Select the Setting

a)Turn the SELECT push-dial until the indicator on the LCD screen reaches the desired setting. Press the push- dial to select.

b)If you accidentally press the wrong setting, press the CANCEL button to return to the main menu and make your selection again.

16

BBM800XL_IB_B10_FA.indd 16 14/09/10 9:09 AM