Breville The Custom Loaf, BBM800XL manual Cleaning the Bread Pan, Cleaning the Paddle

care & cleaning

Cleaning the Bread Pan

1.Half fill the bread pan with warm soapy water. A non- abrasive liquid cleanser or mild spray solution may be used. Allow to stand for 10-20 minutes.

NOTE

Do not immerse the outside of the bread pan in water as this may interfere with the free movement of the wing- nut and drive shaft. Submerge and wash only the interior of the bread pan.

2.Remove the paddle and wash the inside of the bread pan with a soft cloth. Do not use an abrasive cleanser or metal scouring pad as these will scratch the non-stick coating. Ensure there is no baked-on residue or dough on the drive shaft. Rinse thoroughly.

3.Let all surfaces dry thoroughly prior to inserting into the stainless steel housing.

NOTE

−− Some discoloration may appear on and inside the bread pan over time. This is a natural effect caused by moisture and steam and will not affect the bread in any way.

−− The inside of the bread pan is coated with a high quality non-stick coating. As with any non-stick coated surface, do not use abrasive cleansers, metal scouring pads or metal utensils to clean these items as they may damage the finish.

−− Never wash the bread pan in the dishwasher.

50

Cleaning the Paddle

1.Wash the collapsible paddle and fixed paddle with warm soapy water and a soft cloth.

2.Ensure there is no baked-on residue in any of the paddle crevices, including the ‘D’ shaped hole and hinge area. If there is, soak the paddle in warm soapy water. A non- abrasive liquid cleanser or mild spray solution may be used. Allow to stand for 10-20 minutes. Use a wooden toothpick, thin wooden skewer or plastic cleaning brush to remove any bread residue from the crevices and hinge area. Failure to clean the hinge area may eventually result in the collapsible paddle not working effectively. Rinse thoroughly.

3.Let all surfaces dry thoroughly prior to inserting into the bread pan.

NOTE

We do not recommend washing the paddles in the dishwasher. To extend the life of the non-stick coating, always wash in warm soapy water. Do not use abrasive cleansers, metal scouring pads or metal utensils to clean the paddles as these items may damage the paddle surface.

BBM800XL_IB_B10_FA.indd 50 14/09/10 9:09 AM