Panasonic AW-RP50N Bus setting, Bus Aux, Focus assist setting, FASISTOff, CAMSEL Off

Linking the unit with the switcher

Bus setting

From the [SETUP] menu, select [SW LINK] and display [BUS]. Then set the material (AUX, PVW, PinP or KEY) to be sent to the switcher.

3.BUS

AUX

The materials set using this item are sent from the remote camera to the switcher when the remote camera has been selected using one of the unit’s CAMERA STATUS/ SELECTION buttons.

Control can also be exercised by assigning this setting to a USER button.

Focus assist setting

From the [SETUP] menu, select [SW LINK] and display [FASIST]. Then set On or Off.

4.FASIST Off

When “On” is selected as the item setting, the images on the multi view display output by the switcher are switched to the images of the remote camera selected by the unit.

Control can also be exercised by assigning this setting to a USER button.

CAM1

CAM1

MV ON

CAM1 ON

Camera information setting

From the [SETUP] menu, select [SW LINK] and display [CAMSEL]. Then set On or Off.

5.CAMSEL Off

When “On” is selected as the item setting, an icon appears at the bottom left of the image of the remote camera selected by the unit on the switcher’s multi view display. When a remote camera has been selected, its information is sent from the unit to the switcher.

31