Panasonic AW-RP50N Executing the preset data, Deleting the preset memory data

Setting and operating the preset memories

￿￿Executing the preset data

1Press one of the CAMERA STATUS/SELECTION buttons 1 to 5 to select the remote camera to be operated.

Select the remote camera which is to be pointed at the camera angle registered in the preset memory.

2Press the PRESET MEMORY/MENU button, and specify the registered page number and number on the page.

Take this step while the MENU button and PAGE button are in the OFF status.

To follow this operation with the execution of a preset on another page, specify the preset number by pressing

the following buttons in the order given: PAGE button ￿ PRESET MEMORY/MENU button ￿ PRESET MEMORY/MENU button.

When a preset operation has been carried out, the indicator of the specified PRESET MEMORY/MENU button lights.

2

		1	2	3	4	5
MENU	PAGE	GAIN/PED	R/B GAIN	R/B PED	AWB/ABB	SHUTTER	F2	EXIT
		6	7	8	9	10
STORE	DELETE	DETAIL	SCENE/MODE	CAMERA	SETUP	SYSTEM	USER1	USER2
			PRESET MEMORY / MENU
		1	2	3	4	5
IRIS	AUTO		CAMERA STATUS / SELECTION					PT ACTIVE

1

￿￿Deleting the preset memory data

1Press the DELETE button.

2After pressing the PAGE button, press the PRESET MEMORY/MENU button to specify the page number of the preset memory data to be deleted.

In this step, specify the number of the page to be deleted.

3Hold down the PRESET MEMORY/MENU button for the number on the page.

For this step, specify the number on the page which was specified in 2.

The preset memory data is deleted by holding down the PRESET MEMORY/MENU button specifying the number on the page.

22, 3

		1	2	3	4	5
MENU	PAGE	GAIN/PED	R/B GAIN	R/B PED	AWB/ABB	SHUTTER	F2	EXIT
		6	7	8	9	10
STORE	DELETE	DETAIL	SCENE/MODE	CAMERA	SETUP	SYSTEM	USER1	USER2

PRESET MEMORY / MENU

1

6