Maintenance, To cool down | Panasonic AW-RP50N guide

Maintenance

Carry out the maintenance described below at periodic intervals to ensure the safety and performance of the unit.

	Disconnect the power plug, and wipe the unit’s surfaces	WARNING
	with a dry cloth.	WARNING
	with a dry cloth.
	To remove stubborn dirt, soak the cloth in a diluted	Before proceeding with maintenance, disconnect the
	solution of kitchen detergent (neutral), wring it out well,	power plug from the power outlet, and allow the unit
	and wipe the surfaces gently	to cool down.

Notes

Do not use benzene, paint thinners or other volatile solvents.

Before using a chemical cleaning cloth, read the precautions for its use.

Otherwise, electric shocks, burns or injuries may result. Do not connect or disconnect the power plug with wet hands.

Page 79

Image 79

Panasonic AW-RP50N operating instructions Maintenance, Power plug from the power outlet, and allow the unit, To cool down

AW-RP50N specifications

The Panasonic AW-RP50N is a sophisticated remote camera controller designed for professional video production environments. Renowned for its advanced features and versatility, the AW-RP50N serves as an essential tool for operators needing precise control over multiple cameras in real-time.

One of the standout characteristics of the AW-RP50N is its ability to control up to 200 Panasonic cameras simultaneously. This feature is particularly beneficial in large-scale productions, such as broadcasting events, live concerts, and sports. It not only enhances operational efficiency but also provides cinematographers with a centralized point for camera management.

The AW-RP50N boasts a user-friendly interface, equipped with a large LCD touch panel that allows easy navigation and adjustment of camera settings. The intuitive layout makes it simple for operators to switch between camera feeds, adjust PTZ (pan-tilt-zoom) settings, and monitor video feeds without interruption. Customizable settings enable users to tailor the interface to suit their workflow preferences.

In terms of technology, the AW-RP50N supports multiple communication protocols, including IP (Internet Protocol) and serial communication. This flexibility allows integration with various camera models and third-party systems, offering a cohesive control experience. The unit is designed with robustness in mind, ensuring reliability even in demanding environments.

The AW-RP50N features advanced zoom and focus controls, providing smooth and precise movements essential for capturing high-quality video content. With programmable presets, operators can save specific camera angles and settings, making it easy to quickly switch back to preferred positions during production.

Additionally, it supports HD/SD video formats, catering to diverse production needs. The unit's compact design also makes it an ideal choice for mobile setups and small production teams that require portability without sacrificing performance.

Overall, the Panasonic AW-RP50N remote camera controller is a remarkable piece of technology, combining scalability, ease of use, and high-performance capabilities. Its robust feature set makes it an indispensable asset for professionals in the broadcasting and production industry, ensuring dynamic and reliable control of remote cameras in any situation. Whether scaling a large production or managing a small shoot, the AW-RP50N enables creators to achieve their artistic vision with precision and ease.

Contents

Operating Instructions Contents Before use How to turn the power of the remote cameras on How to turn the power of the remote cameras on and off Preset numbers and registered pages Setting and operating the preset memoriesRegistering data in the preset memories Hold down the Preset MEMORY/MENU button of the number on Deleting the preset memory data Executing the preset dataHold down the Preset MEMORY/MENU button for the number on Setting the gain Selecting the settings for a selected remote cameraSetting the pedestal Set the Preset MEMORY/MENU 3 button R/B PED to on Setting the R and B gain valuesSetting the R and B pedestal Set the Preset MEMORY/MENU 2 button R/B Gain to on Selecting the white balance mode Setting the white balanceSet the Preset MEMORY/MENU 4 button AWB/ABB to on Turn the F1 dial to select the white balance mode AWB Mode AWB a SET Automatically adjusting the white balanceTurn the F2 dial to select AWB, and press the F2 dial Turn the F1 dial to select ATW Manually adjusting the white balanceAutomatic color temperature tracking ATW AWB Mode ATW SET Manually adjusting the black balance Setting the black balanceAutomatically adjusting the black balance AWB Mode AWB B SET ABB Turn the F1 dial to select the shutter mode Setting the shutter speedSetting the detail Set the Preset MEMORY/MENU 5 button Shutter to on Specifying the color bars Setting the shooting modeSet the Preset MEMORY/MENU 7 button SCENE/MODE to on Turn the F1 dial to select the shooting mode Table of operations Operating the menu items of the selected remote camera Swlink Setting the User buttonsSet the Preset MEMORY/MENU 9 button Setup to on Registering functions User buttons Turn the F1 dial to select the target menu item Setting the functions Focus DIR Normal Setting the remote camera operationsSetting the pan, tilt, zoom and focus operation directions Zoom DIR Normal Z/F Selecting the control items pan, tilt, zoom and focusSpeed with Z Off Speed Target T Curv Switching from focus control to iris control or vice versaSetting the PAN/TILT lever inclination and speed FOCUS/IRIS Normal Diag Speed Scope Mode a Setting the lower limit Setting the upper limit Setting the right limit Setting the left limit Home Position SET Returning the remote cameras to their home position 6FUNCTION MIN Speed Adjusting the minimum pan/tilt start speedAdjusting the minimum lens zoom start speed T MIN Speed Start Locking the button operations 8GPI Setting the preset numbers10MENU CTL Setting button operation enable or disable Menu Control Enable Ipsw Linking the unit with the switcherSwitcher network settings Set Preset MEMORY/MENU 10 button System to on 3SW Assign Setting the image output and image inputTurn the F1 dial to select the input line of the switcher 1CAMERA CTL 2SW Link Switcher settingsSet Preset MEMORY/MENU 9 button Setup to on Turn the F1 dial to select the menu item to be set Fasist Off BUS AUXCamsel Off T Lever Tallyip OffSelf 3SW Disp Setting for the information to be displayed on the OSDSetting all the information displays together Turn the F1 dial to and select the menu item to be set Setting each information item to be displayed Turn the F2 dial to display the remote camera item Checking the equipment alarm information8ALARM Power No Alarm Press the F2 dial to initialize the settings Turn the F2 dial to select the initializing modeReturning the unit to its factory status Current Max mA AW-RP50 Control interface for external devicesSub 15-pin, female, inch thread Example of GPIOut connections Software provided on the CD-ROM RP setting toolInstalling the software IP settings Click Renew Auto IP settingChanging the IP addresses Changing the camera numbers Acquiring information Alarm displaysDisplaying the camera names Initializing the IP addresses Input the filename, and click Save Saving the setting filesSaving and loading data System section, click Save under From AW-RP50 Saving the log files Loading the setting files Pedestal AW-HE50 Table of menu items Video Setup Setup PTZ ADJ MIN Speed Start Limit UP AW-HE50 F0410Y0 Operating Instructions Basics FCC Note Safety precautions Important Safety Instructions Before use Overview Before use Characteristics Pan-tilt heads and cameras supported AccessoriesPan-tilt heads supported CPU Required personal computer environment Handle carefully Installation precautionsConnecting the power supply Choosing the best installation location Operating precautions Control panel Power indicator Power F1 dial, F2 dialAlarm indicator Alarm Parts and their functions User buttons USER1, USER2 Preset MEMORY/MENU buttonsCamera OSD button Camera OSD Exit button Exit Auto iris button Auto Auto focus button AutoFOCUS/PUSH OAF dial FOCUS/PUSH OAF Iris dial Iris LAN connector LAN RJ-45 10BaseT/100BaseTX Power switch Power DC in socket DC 12Ground terminal Signal GND Service switch SV/NM Basic operations of the unit Basic operations for the menus Change the settings using the F1 dial and F2 dialSelect the target menu Setting the unit Network settings MAC Address 000 Example of IP connections ConnectionsConnections with the AW-HE50 and AW-HS50 Connection with the AW-HE50 Example of serial connectionsConnection with the AW-HE100 Max m 3280 ft Connections with the AW-PH400 and camera Connections with the AW-PH405 and camera Connection with the AW-PH650 Serial connection Settings for connection with the remote camerasIP connection YES Setting the IP addresses automatically auto IP settingWhen setting the IP addresses for the first time Auto Setup Renew Turn the F2 dial, select Yes, and then press the F2 dial Auto Setup Keep IP Duplicate ERR Group Select Setting the IP addressesChanging the IP addresses of the remote cameras Selecting the camera group Clearing the IP address control tables Changing the IP address of the switcherAuto Setup ALL Clear Changing the camera numbers Indicator lighting statuses and remote camera statuses Set the Preset MEMORY/MENU 8 Button Camera to onSelecting the remote cameras to be operated Power plug from the power outlet, and allow the unit MaintenanceTo cool down Unit mm inch Appearance Input/Output connector SpecificationsAC adapter F0410Y0

Panasonic AW-RP50N Maintenance, Power plug from the power outlet, and allow the unit

Models: AW-RP50N

Maintenance

power plug from the power outlet, and allow the unit

to cool down.

AW-RP50N specifications