Manuals / Panasonic / Household Appliance / Home Security System

Panasonic AW-RP50N How to turn the power of the remote cameras on, 1Select the remote camera

Models: AW-RP50N

1 82

Download 82 pages 17 Kb

Page 4

How to turn the power of the remote cameras on

How to turn the power of the remote cameras on and off

How to turn the power of the remote cameras on

Follow one of the procedures below to turn on the power of the remote cameras.

Turning on the power one camera at a time

Turning on the power of a multiple number of cameras

Turning on the power of all the cameras

Turning on the power of the selected group of cameras

Each of these procedures is described in turn below.

Turning on the power one camera at a time

1Select the remote camera.

When the corresponding CAMERA STATUS/ SELECTION button is held down, the name of the remote camera is displayed on the top line of the LCD panel and POWER OFF is displayed on the bottom line.

2Turn the F2 dial to select “ON,” and press the F2 dial.

The power of the selected remote camera is turned on.

							2
			CAM100<CAMERA01>			F1
			POWER:ON			F2
POWER	ALARM						F1	CAMERA
								OSD
		1	2	3	4	5
MENU	PAGE	GAIN/PED	R/B GAIN	R/B PED	AWB/ABB	SHUTTER	F2	EXIT
		6	7	8	9	10
STORE	DELETE	DETAIL	SCENE/MODE	CAMERA	SETUP	SYSTEM	USER1	USER2
			PRESET MEMORY / MENU
		1	2	3	4	5
IRIS	AUTO		CAMERA STATUS / SELECTION					PT ACTIVE
			CAMERA STATUS / SELECTION

1

Turning on the power of a multiple number of cameras

1Set the MENU button to ON.

Press the MENU button to light its indicator.

2Set PRESET MEMORY/MENU 8 button (CAMERA) to ON.

When the button is pressed and its indicator is lighted, the [CAMERA] menu is displayed on the LCD panel.

[1]GROUP ▼

3Turn the F1 dial to display the [POWER] menu, and press the F1 dial.

[2]POWER

Press the F1 dial.

1.CAM POWER

▼

OFF

Turning on the power of all the cameras

4Turn the F2 dial to select “ALL ON,” and press the F2 dial.

1.CAM POWER

▼

ALL ON

The power of all the remote cameras is now turned on.

Turning on the power of the selected group of cameras

4Turn the F2 dial to select “GROUP ON,” and press the F2 dial.

1.CAM POWER

▼

GROUP ON

The power of the selected group of remote cameras is turned on.

4

Image 4

Panasonic AW-RP50N How to turn the power of the remote cameras on, 1Select the remote camera, 1Set the MENU button to ON

Contents

Operating Instructions Remote Camera ControllerModel No. AW-RP50N Operations and SettingsContents How to turn the power of the remote cameras onSelecting the settings for a selected remote Operating the menu items of the selected remoteNetwork-relatedprecautions Before useOverview Concerning the Operating InstructionsHow to turn the power of the remote cameras on 2Set PRESET MEMORY/MENU 8 button CAMERA to ON1Select the remote camera 1Set the MENU button to ONSetting and operating the preset memories Registering data in the preset memories3Press the STORE button MemoExecuting the preset data Deleting the preset memory data1Press the DELETE button Setting and operating the preset memoriesSetting the gain Setting the pedestal3Turn the F1 dial to select the setting 3Turn the F2 dial to select the settingSetting the R and B gain values Setting the R and B pedestalRGAIN ±000 BGAIN ±000 RPEDSetting the white balance Selecting the white balance modeAWB MODE AWB B 1Set the MENU button to ONAutomatically adjusting the white balance AWB MODE AWB AMemo 1Set the MENU button to ON3Turn the F1 dial to select ATW 3Set the MENU button to ON1Set the MENU button to ON Setting the black balance Automatically adjusting the black balanceManually adjusting the black balance 2Set the MENU button to ONSetting the shutter speed Setting the detail2Set the PRESET MEMORY/MENU 6 button DETAIL to ON 3Turn the F1 dial to select the shutter modeSetting the shooting mode Specifying the color bars3Turn the F1 dial to select the shooting mode SCENE MANU1 MODE CAMTable of operations Remote cameraMenu ON/OFF Cursor movementsSetting the USER buttons 2Set the PRESET MEMORY/MENU 9 button SETUP to ONRegistering functions in the USER buttons 3Press the F1 dialSetting the functions 4Turn the F1 dial to select the target menu item4OPERATE 1.PAN DIRSetting the remote camera operations Setting the panning directionSetting the tilting direction Setting the zooming direction5.SPEED WITHZ Off 6.SPEED TARGET R/T/Z/FP/T/Z/F Setting the functionsSetting the PAN/TILT lever inclination and speed 7.FOCUS/IRIS NORMAL8.P/T CURV Setting the functions1.DIAG SPEED 2.SCOPE MODE ASetting the functions ModeSetting the upper limit Setting the lower limitDisplay that appears with the AW-HE50 3.LIMIT UP OffSetting the left limit Setting the right limit5.LIMIT LEFTOff 5.LIMIT LEFTOn3.HOMEPOSITION SET Setting the functions6FUNCTION Controlling an ND filter1.ND FILTEROff Controlling an AC adapter AW-PS300AAdjusting the minimum pan/tilt start speed Adjusting the minimum lens zoom start speed1.P/T MIN SPEED START 2.Z MIN SPEEDSetting the preset numbers Setting button operation enable or disable1.MENU CONTROL ENABLE Locking the button operationsLinking the unit with the switcher Switcher network settings2Set PRESET MEMORY/MENU 10 button SYSTEM to ON 1Set the MENU button to ONSetting the image output and image input 1CAMERA CTL3SW ASSIGN 1.INPUT1 CAM1Switcher settings 2Set PRESET MEMORY/MENU 9 button SETUP to ONLinking the unit with the switcher 1Set the MENU button to ONBus setting Focus assist settingCamera information setting 3.BUS AUXOA tally setting PAN/TILT lever control setting6.TALLY IP Off 7.P/T LEVERSetting all the information displays together Linking the unit with the switcher2Set PRESET MEMORY/MENU 9 button SETUP to ON 1Set the MENU button to ONSetting each information item to be displayed Remote camera alarm information9.ALARM Off Video formatChecking the equipment alarm information 8ALARM1.POWER NO ALARM NO ALARMSet PRESET MEMORY/MENU 10 button SYSTEM to ON 5Press the F2 dial to initialize the settings1.INITIALIZE SETUP SETUPSETTINGControl interface for external devices TALLY/GPID-sub 15-pin,female, inch thread Example of GPI Out connectionsRP setting tool Installing the softwareIP settings Software provided on the CD-ROMAuto IP setting Changing the IP addressesChanging the camera numbers 1Click RENEWAlarm displays Displaying the camera namesInitializing the IP addresses Acquiring informationSaving the setting files Saving and loading data2Input the filename, and click Save RP setting toolLoading the setting files Saving the log files1Click File 2Select the file, and click OpenTable of menu items SettingButton Menu itemSetting Table of menu itemsButton Menu itemSetting Table of menu itemsButton Menu itemSetting Table of menu itemsButton Menu itemF0410Y0 Remote Camera Controller Operating Instructions BasicsModel No. AW-RP50N Safety precautions THIS APPARATUS MUST BE EARTHEDSafety precautions IMPORTANT SAFETY INSTRUCTIONSindicates safety information Network-relatedprecautions AccessoriesInstallation precautions Operating precautionsNetwork-relatedprecautions Before useOverview Concerning the Operating InstructionsCharacteristics Compact designIP connection and serial connection supported IP connectionPan-tiltheads and cameras supported AccessoriesPan-tiltheads supported Required personal computer environment Installation precautions Connecting the power supplyChoosing the best installation location Handle carefullyOperating precautions When the product is to be discardedHandle carefully Avoid humidity and dustPOWER indicator POWER ALARM indicator ALARMParts and their functions Control panelPRESET MEMORY/MENU buttons PRESET MEMORY/MENU CAMERA OSD button CAMERA OSDEXIT button EXIT USER buttons USER1, USER2Button indicator ON Auto focusing Button indicator OFF Manual focusingWhen it is turned clockwise Button indicator ON Auto irisPOWER switch POWER Ground terminal SIGNAL GNDSERVICE switch SV/NM LAN connector LAN RJ-4510BaseT/100BaseTX1Turn on the unit’s power 4Adjust the zoom5Adjust the lens iris 6Adjust the focusSelect the target menu Basic operations for the menusSet the MENU button to ON Network settings Setting the unit6Turn the F2 dial, and select the setting 7Press the F2 dial, and change the settingSetting the IP address Setting the subnet maskSetting the default gateway Setting the MAC addressConnections Example of IP connectionsConnections with the AW-HE50and AW-HS50 SDI video signalExample of serial connections Connection with the AW-HE50Connection with the AW-HE100 ConnectionsConnections with the AW-PH400and camera Switch settingsConnections Zoom lensConnections with the AW-PH405and camera ConnectionsZoom lens 10BASE-TUTP category 5 straight cableConnection with the AW-PH650 ConnectionsRJ-45relay adapter 10BASE-TUTP category 5 straight cableSettings for connection with the remote cameras Serial connectionIP connection 1.CAM1 Serial2 On the SYSTEM menu, select AUTO SET When setting the IP addresses for the first timeConnections SET UP IP ttttt SET UP IP COMPLETESET UP IP SET UP ERR C 20/20 S 1/1 C/S OVER! YES1.AUTO SETUP KEEP Connections2 On the SYSTEM menu, select AUTO SET MemoSET UP IP IP DuplicateERR SET UP IP tttttSET UP IP COMPLETE SET UP IP SET UP ERRSetting the IP addresses Changing the IP addresses of the remote camerasSelecting the camera group 1.GROUP SELECTChanging the IP address of the switcher Changing the camera numbersClearing the IP address control tables 3Press the F2 dial to enter the IP address2Set the PRESET MEMORY/MENU 8 BUTTON CAMERA to ON Selecting the remote cameras to be operated1Set the MENU button to ON 3Press the F1 dialMaintenance to cool downAppearance Unit mm inch189 7-7/16 210 8-1/4Specifications Input/Output connectorPower requirements: DC 12 V 10 % Power consumption DC 12 V, 0.5 AF0410Y0