Panasonic AW-RP50N Setting the functions, 4Turn the F1 dial to select the target menu item, Tilt

Setting the functions

This section describes how the unit’s functions are set. The following functions can be set.

￿￿Setting of the remote camera operations

￿￿Registration of functions in the USER buttons

￿￿Setting the speed at which to move to the preset memory setting position

￿￿Setting the control items used when preset data is executed

￿￿Controlling the peripheral devices connected to the

remote cameras

• ND filter	• Wiper
• AC adapter	• Heater, fan
(AW-PS300A)	• Halogen lamp

• Defroster

￿￿Assignment of preset data when emergency interrupts occur

￿￿Locking of button operations

The settings are established using the [SETUP] menu. First, the basic menu operations will be described.

1Set the MENU button to ON.

Press the MENU button to light its indicator.

2Set the PRESET MEMORY/MENU 9 button (SETUP) to ON.

When the button is pressed and its indicator lights, the [SETUP] menu is displayed on the LCD panel.

[1]USER ▼

3Turn the F1 dial to display the target menu item, and press the F1 dial.

For details on the [SETUP] menu items, refer to the “Table of menu items”.

[4]OPERATE

Press the F1 dial.

1.PAN DIR ▼

NORMAL

4Turn the F1 dial to select the target menu item.

1	.PAN	DIR	▼
		NORMAL
		Turn the F1 dial.
2	.TILT	DIR
		NORMAL

5Turn the F2 dial to select the setting. Then press the F2 dial to change the setting.

2.TILT DIR

NORMAL

Turn the F2 dial, and then press it.

2.TILT DIR

REVERSE

17