Using the Oven Control

Flashing Display

When power is connected

or interrupted, oven display flashes. Press CLOCK to reset display. Clock may need to be reset.

Setting Electronic Clock

12 hour clock does not display AM, PM or military time. When power is connected or restored, display flashes until CLOCK or CANCEL pad is pressed.

1.Press CLOCK pad.

2.Press digit pads (1 through 0) until correct time-of-day displays.

3.Press START pad to set time, or time is set after 5 seconds of no adjustment.

Timer Signal

When time elapses, timer will sound three one-second beeps and then once every 30 seconds. END also displays. Press TIMER ON/OFF pad to stop timer and return to clock display.

Setting Minute Timer

Timer is a timer only. Electronic timer does not control bake, broil or self-clean function. Timer can be set from 1 minute up to

11 hours and 59 minutes.

1.Press TIMER ON/OFF pad.

2.Press digit pads (1 through 0) until desired

time displays.

• Timer begins counting down automatically after time is entered.

To view clock while timer counts down, press CLOCK pad. Timer will return after approximately 3 seconds of no input.

3.Press and hold TIMER ON/OFF pad to cancel timer signal.

After time elapses, timer beeps three one-second tones, and then once approximately every 30 seconds until CANCEL is pressed. END is also displayed when the timer finishes.

Resetting and Canceling Timer

To reset the time when remaining time is displayed, press

TIMER ON/OFF pad, then use the digit pads to enter the new time. To cancel timer when remaining time is displayed or when signal is beeping, press and hold TIMER ON/OFF pad for approximately

3 seconds or press CANCEL pad. CANCEL will stop all cooking functions if the oven is in use.

14

Page 14
Image 14
Amana ACF4255A owner manual Using the Oven Control, Flashing Display, Setting Electronic Clock, Setting Minute Timer