FS-100 Portable DTE Recorder
116
Log Files
With each recording of a particular clip on a disk, the FS-100
creates a text log file to identify information about the recorded
clip and the recording session. Information includes:
•Clip name
• Clip in/out source TC values
•Clip duration
• Clip type (record file type).
The log file also identifies when the shock cache becomes low and
when disk or other errors occur during a recording.
Error Messages
Error messages may appear on the FS-100 LCD display from time
to time. The purpose of these messages is to alert you to action that
may effect your FS-100 operation. Below is a list of error messages
and actions you can take:
Error Message Description Action
LOW BATTERY! Battery power is low. Connect AC Power or replace the battery
pack.
HIGH
TEMPERATURE!
The unit is getting too hot for
normal operation.
Make sure the vent and fan intake holes
are clear.
NO SPACE LEFT! The Disk Drive is Full. Transfer files off the drive and format it
before attempting to do more recording.
DISK ERROR
XXX
Lost Disk Communication. Contact Focus Enhancements Technical
Support.
NO DISK
DETECTED
Lost Disk Communication. Contact Focus Enhancements Technical
Support.
WRONG
PRODUCT ID
Incorrect Software Loaded. Download correct software and perform
upgrade again.
FILE NOT FOUND Wrong filename or missing file. Check filename or that upgrade file
exists.
AUDIO MUTE Record or Playback with VF
mode set to 24, 25 or 30 is
muted for the PN DTE formats
(QuickTime PN and P2 PN).
This is normal. No action is required