Quickstart

Installing / Removing the Battery Pack

Installing a Battery

 

 

Battery

Gently press DOWN

 

 

 

 

Latch Hook

while sliding battery pack

Latch Slot

FORWARD

 

 

 

Latch

 

 

 

 

 

 

Battery Pack Guides

1.Place the unit, so that the battery compartment is up.

2.Position the battery pack, as shown above, so that the latch hook is almost in the latch slot, and touching the floor of the battery compartment.

3.Slide the battery forward while gently pressing down.

4.Feel the battery slide along guides and seat itself.

5.When seated, the battery latch clicks into place.

Removing a Battery

1.Slide the battery latch to the left and hold.

2.Apply backward pressure to the battery pack at the triangle/arrow and gently slide the pack back about 1cm or 3/8 in.

3.This is the reverse motion of inserting the battery.

4.Remove the battery pack.

FS-100 Portable DTE Recorder 22

Page 40
Image 40
FOCUS Enhancements DVCPRO50, FS-100 manual Installing / Removing the Battery Pack, Installing a Battery, Removing a Battery