FS-100 Functions
FS-100 Portable DTE Recorder
63
TC SET
The Timecode Set parameter stores a user defined timecode in the
FS-100’s non-volatile memory. This value is available for use by the
FS-100 immediately after exiting TC SET.
•TC FREE RUN
The FS-100 uses this value on the next recording after it is set
in TC SET.
•TC REGEN
This is the starting value when using an empty hard disk
drive for recording.
•TC REC RUN
This is the value used to begin every recording session after a
power cycle.

TC SET

00 : 00 : 00 : 00

HH : MM : SS : FF

BACK