Quickstart
FS-100 Portable DTE Recorder
30
Set Time and Date
1. Press the Right navigation button several times until the
Setup display appears on the screen as shown below:
2. Use the Down navigation button to highlight the date and
press the Right navigation button to access the Set Date
screen.
3. Use the Up and Down navigation buttons to change the
highlighted value. Use the Right and Left navigation buttons
to highlight the Month, Day, and Year.
4. When complete, press the right-most Function button
indicated as BACK on the screen. The new date will be
indicated on the Setup Screen.
Date and Time Must Be Set
The date and time must be set because they are used in the FS-100 file
naming function.
SETUP
09 / 15 / 05
11 : 21 : 13
V 3 . 1. 0
-LCDLIGHT ON
SET DATE
09 / 15 / 05
MM / DD / YY
BACK