FOCUS Enhancements DVCPROHD, DVCPRO50, FS-100, DVCPRO/DV manual Disp display Information Fields

FS-100 Functions

10.Reel Display

In Record or Playback modes, this item displays the particular REEL that a clip is located in or, has been marked to. If in PLAY FROM > REEL LIST mode, the REEL appears in brackets for example, [REEL]. This area is blank if NO REEL has been selected.

11.DISP information field that displays data type.

12.DISP information field that displays current data.

DISP (display) Information Fields

Use the DISP function button to display current operation information fields 11 and 12. The data shown depends on the mode of operation, i.e. DVCPROHD, DVCPRO50, DVCPRO/DV.

Pressing the DISP button advances the display to the next category of information. Below is a table of the data types and data available with DISP.

Field	Data Type /
Number	Data Description
11	COUNTER
12	Shows frame count of current video clip during record or
	playback.
11	REMAINING
12	Record: counts down number of available frames
	remaining, as time, on a specific disk.
	Playback: displays time remaining of the current clip.
11	DV (NTSC or PAL) or HD (see note following table)
12	Record: displays the external timecode value being
	generated by a camcorder or other device during a
	recording session. Timecode mode must be set to EXT TC
	for this function to operate, refer to TIME CODE EXT, REC
	RUN, FREE RUN, REGEN on page 62.
	Playback: displays the embedded DV timecode value in a
	particular track.
	In VF record mode, this displays the Base Frame Rate.
11	UB NTSC (In VF record mode, this displays the Frames
	Per Second of input stream or Incoming Frame Rate.)

FS-100 Portable DTE Recorder 44