FOCUS Enhancements DVCPROHD, DVCPRO50, DVCPRO/DV manual Setting Up Master and Slave FS-100

FS-100 Functions

Setting Up Master and Slave FS-100

1

4

Master FS-100	Slave FS-100
2	3
STOP 1 - 001	CONNECT
COUNTER	COMPUTER THEN
00 : 00 : 00 : 00	ENABLE BYPASS

1.Connect the camcorder to the master FS-100, DV I/O connector using the supplied FireWire cable.

2.Master

Power on unit.

Go to the HDD Mode menu screen and enable

USE EXT FS-100.

3.Connect the FS-100s through the units Computer I/O connectors using a 6-pin to 6-pin FireWire cable.

4.Slave

Power on the unit

Go to the HDD Mode screen and enable DD DRIVE.

5.Master

Begin recording or playback using the master FS-100.

Use DD Drive Mode when Connecting to a PC

It is important to take the master FS-100 out of USE EXT FS-100 mode before attempting to connect to a computer.

To do this, select DD DRIVE from the HDD Mode screen. This returns use of the unit to hard disk mode.

FS-100 Portable DTE Recorder 56