FOCUS Enhancements DVCPROHD, DVCPRO50, FS-100 manual Record, Back Search WW, Play, Forward Search

Quickstart

Record

Press this button once when the FS-100 is in Stop mode to put the FS-100 into REC-PAUSE. Press it again to start recording. Pressing the Record button while recording, causes the current clip to close and a new clip is created without dropping any frames. This button is the only button that has a red legend on the front panel.

Back Search WW

Press this button to play video at speeds different than real- time. Refer to the note in the Forward Search section.

Play X

Press this button to start playback of the selected clip.

Forward Search XX

Press this button to play video at speeds different than real- time.

Fast Forward and Reverse

Pressing the Forward Search button multiple times results in increases in the search speed, i.e. fast forward. This mode works both in forward and reverse functions. For instance, if you are in 10X FF speed and you press the Back Search button once, the FS-100 is now in 2X FF mode. In addition, this applies to backward search speeds. The default speed resolution is as follows (NTSC and PAL, have slightly different multiples for

<1X):

•Reverse: -30X, -10X, -2X, -1X (reverse play), -1/2X(-15fps), Still.

•Forward: Still, +1/2X (+15fps), +1X (play), +2X, +10X, +30X

Fast Forward and Reverse Search Compatible Camcorders

In Forward and Reverse Search modes, some camcorders do not display video when played-back from an external device, such as the FS-100.

FS-100 Portable DTE Recorder 8