Agilent Technologies 5000 Series manual CHANnelnIMPedance

3Commands by Subsystem

:CHANnel<n>:IMPedance

(see page 530)

Command Syntax :CHANnel<n>:IMPedance <impedance> <impedance> ::= {ONEMeg FIFTy}

<n> ::= {1 2 3 4} for the four channel oscilloscope models <n> ::= {1 2} for the two channel oscilloscope models

The :CHANnel<n>:IMPedance command selects the input impedance setting for the specified analog channel. The legal values for this command are ONEMeg (1 MΩ) and FIFTy (50Ω).

Query Syntax :CHANnel<n>:IMPedance?

The :CHANnel<n>:IMPedance? query returns the current input impedance setting for the specified channel.

Return Format <impedance value><NL>

<impedance value> ::= {ONEM FIFT}

See Also • "Introduction to :CHANnel<n> Commands" on page 143

148 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference