Agilent Technologies 5000 Series manual TRIGgerLINSTANdard, Return Format stdNL

Commands by Subsystem 3

:TRIGger:LIN:STANdard

(see page 530)

Command Syntax :TRIGger:LIN:STANdard <std>

<std> ::= {LIN13 LIN20}

The :TRIGger:LIN:STANdard command sets the LIN standard in effect for triggering and decoding to be LIN1.3 or LIN2.0.

Query Syntax :TRIGger:LIN:STANdard?

The :TRIGger:LIN:STANdard? query returns the current LIN standard setting.

Return Format <std><NL>

<std> ::= {LIN13 LIN20}

See Also • "Introduction to :TRIGger Commands" on page 313

•":TRIGger:MODE" on page 319

•":TRIGger:LIN:SIGNal:DEFinition" on page 497

•":TRIGger:LIN:SOURce" on page 368

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 369