Agilent Technologies 5000 Series manual TRIGgerSPICLOCkTIMeout

3Commands by Subsystem

:TRIGger:SPI:CLOCk:TIMeout

(see page 530)

Command Syntax :TRIGger:SPI:CLOCk:TIMeout <time_value>

<time_value> ::= time in seconds in NR1 format

The :TRIGger:SPI:CLOCk:TIMeout command sets the SPI signal clock timeout resource in seconds from 500 ns to 10 s when the :TRIGger:SPI:FRAMing command is set to TIMeout. The timer is used to frame a signal by a clock timeout.

Query Syntax :TRIGger:SPI:CLOCk:TIMeout?

The :TRIGger:SPI:CLOCk:TIMeout? query returns current SPI clock timeout setting.

Return Format <time value><NL>

<time_value> ::= time in seconds in NR1 format

See Also • "Introduction to :TRIGger Commands" on page 313

•":TRIGger:SPI:CLOCk:SLOPe" on page 373

•":TRIGger:SPI:SOURce:CLOCk" on page 378

•":TRIGger:SPI:FRAMing" on page 375

374 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference