Agilent Technologies 5000 Series manual TRIGgerIICSOURceDATA, TRIGgerIICSOURceCLOCk on

3Commands by Subsystem

:TRIGger:IIC:SOURce:DATA

(see page 530)

Command Syntax :TRIGger:IIC:[SOURce:]DATA <source>

<source> ::= {CHANnel<n> EXTernal} for the DSO models

<source> ::= {CHANnel<n> DIGital0,..,DIGital15} for the MSO models <n> ::= {1 2 3 4} for the four channel oscilloscope models <n> ::= {1 2} for the two channel oscilloscope models

	The :TRIGger:IIC:[SOURce:]DATA command sets the source for IIC serial
	data (SDA).
Query Syntax	:TRIGger:IIC:[SOURce:]DATA?
	The :TRIGger:IIC:[SOURce:]DATA? query returns the current source for IIC
	serial data.
Return Format	<source><NL>
See Also	• "Introduction to :TRIGger Commands" on page 313
	• ":TRIGger:IIC:SOURce:CLOCk" on page 359

360 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference