4059-XXX
Envelope Feeder Sub Error Codes
Status byte 1 contains the most valuable information to help isolate a feed problem with the envelope feeder and is the only byte contained in the following table.
Status | Explanation | |
Byte 1 | ||
| ||
|
| |
00 | There was no envelope feeder error reported. | |
|
| |
10 | Printer failed POST - Homing of Envelope feeder | |
|
| |
11 | Printer failed POST - Halted Envelope Feeder | |
|
| |
21 | The envelope feeder failed to feed, envelope jam. | |
|
| |
30 | The D.C. motor failed to reach operating speed. | |
|
| |
32 | The motor stalled. | |
|
| |
36 | The motor failed to stop. | |
|
|
Duplex Unit Sub Error Codes
Status byte 4 contains the most valuable information to help isolate a failing part or assembly in the duplex option and is the only byte contained in the following table.
Status | Explanation | |
Byte 4 | ||
| ||
|
| |
00 | No duplex error. No problem was reported to the engine by the | |
| duplex system card. | |
|
| |
01 | The leading edge of the sheet of paper never arrived at the input | |
| sensor. | |
|
| |
02 | The duplex option system board never received media notification | |
| from the printer. | |
|
| |
03 | The trailing edge of the sheet of paper never cleared the input | |
| sensor. | |
|
|
Diagnostic Information
