The base printer does not recognize that the high capacity input tray is installed.
| FRU | Action |
|
|
|
1 | High Capacity Feeder | Check the high capacity feeder input |
| Autoconnect Mechanical | tray autoconnect to make sure it is |
| Check | mounted correctly and is not pushed |
|
| down into the frame assembly or |
|
| damaged. Be sure the high capacity |
|
| feeder input tray autoconnect is |
|
| properly connected to the high |
|
| capacity feeder tray option board |
|
| assembly. |
|
|
|
2 | Base Printer or option | Check the option or base printer |
| mounted above | autoconnect for signs of damage. |
|
| Repair the high capacity option |
|
| autoconnect as necessary. |
|
|
|
3 | 14 Pin HCIT Flex Cable | Check the 14 pin flexible cable to be |
|
| sure it is installed correctly and |
|
| properly seated in the connectors on |
|
| both boards. Check the cable for |
|
| damage. Repair or replace as |
|
| necessary. |
|
|
|
