Lexmark 4059-XXX manual Print Quality Background

4059-XXX

	FRU	Action
7	Lines spaced 49.74 mm	Replace the FRUs in the following
	(1.958 inch) apart	order:
		redrive assembly
		fuser assembly
8	Lines spaced 51.02 mm	Replace the transfer roll.
	(2.009 inch) apart
9	Lines spaced 52.23 mm	Replace the redrive assembly.
	(2.056 inch) apart
10	Lines spaced 76.53 mm	Replace the FRUs in the following
	(3.013 inch) apart	order:
		alignment assembly
		main drive gearbox assembly
11	Lines spaced 95.66 mm	Replace the FRUs in the following
	(3.766 inch) apart	order:
		toner cartridge
		main drive gearbox assembly
12	Lines spaced 99.49 mm	Replace the redrive assembly.
	(3.917 inch) apart
13	Lines spaced 114.79 mm	Replace the alignment assembly.
	(4.519 inch) apart

Print Quality - Background

Service Tip: Some background problems can be caused by rough papers or non-Lexmark toner cartridges. If the rough paper mode is on, turn it off and run the print test.

Some slick or coated papers may also cause background. Some problems occur with printers that run a large amount of graphics in a humid environment. The customer may try to improve the print quality by increasing the transfer setting.

Diagnostic Information 2-96