4059-XXX
User Error Message | Explanation |
|
|
80 Scheduled | The operator panel displays this message at each |
Maintenance | 250K page count interval. It is necessary to |
| replace the fuser assembly, transfer roller, |
| compensator |
| interval to maintain the print quality and reliability |
| of the printer. The parts are available as a |
| maintenance kit. For more information, go to |
| “Scheduled Maintenance (2420/2450/2455/ |
| 3455)” on page |
|
|
81 Engine Code CRC | This error displays when the microcode to be |
Failure | programmed in the engine flash code module has |
| failed a CRC check. Press Go to clear the |
| message. The microcode data is discarded and |
| must be |
|
|
88 Toner Low | This error displays when toner low occurs and the |
| toner low alarm is activated. Press Go to clear |
| this message. |
|
|
User Line 2 Messages |
|
If none of the conditions exist that are listed in the following table, line 2 is blank. If any of the messages in the table are displayed the following actions can be taken:
Press Menu> or <Menu to take the printer offline and access the Ready Menu group.
Note: The Menu buttons are not active if Menu Lockout is turned on.
Press Stop to take the printer offline. The Not Ready message is displayed. No more data is processed from the host computer. Press the Go button to return the printer to the Ready state.
Diagnostic Information
