4059-XXX
User Error Message | Explanation | |
|
|
|
56 | Standard Serial | This error is displayed when data is sent to the |
Disabled | printer across the standard serial port, but the | |
|
| port has been disabled. |
|
|
|
56 | Parallel Port Disabled | This error is displayed when data is sent to the |
|
| printer across the parallel port, but the parallel |
|
| port has been disabled. Once this message is |
|
| displayed, reporting of further errors is |
|
| suppressed until the menus are entered, or the |
|
| printer is reset. |
|
|
|
58 | Too Many Trays | This error code is displayed when too many input |
Attached | trays are attached to the printer. | |
|
|
|
58 | Too Many Bins | This error code is displayed when too many |
Attached | optional output bins are attached to the printer. | |
|
|
|
58 | Too Many Disks | This error is displayed when too many disks are |
Installed | attached to the printer. | |
|
|
|
61 | Defective Disk | This error code is displayed when the printer |
|
| detects a defective disk. This error may occur at |
|
| power on or during disk format and write |
|
| operations. The following actions may be taken |
|
| while this message is displayed: Press Go to |
|
| clear the message. The disk is marked defective |
|
| and normal printer operations continue. Disk |
|
| operations are not allowed with a defective disk. |
|
| The Format Disk menu is not shown. |
|
|
|
62 | Disk Full | This error code is displayed when there is not |
|
| enough free space on the disk to hold the |
|
| resources that have been requested to be written |
|
| to the disk. This message displays for both |
|
| resource and PostScript Disk operators when the |
|
| disk is full. |
|
|
|
63 | Unformatted Disk | This error code displays when the printer detects |
|
| an unformatted disk at power on. Press Go to |
|
| clear the message. The disk is marked as bad |
|
| and normal operation continues. Disk operations |
|
| are not allowed until the disk is formatted. |
|
|
|