4059-XXX
| FRU | Action |
|
|
|
5 | +5 V dc at the engine board | Check for +5 V dc at the +5 V dc test |
| Test Point | point on the engine board. If correct, |
|
| replace the engine board. If |
|
| incorrect, go to step 6. |
|
|
|
6 | LVPS Fuse F1 | Remove the LVPS from the printer |
|
| and check fuse F1. Replace the fuse |
|
| if the fuse is blown. |
|
|
|
7 | LVPS Fuse F1 - Continues | Replace fuse F1 if necessary. Turn |
| to blow after LVPS installed | the LVPS on/off switch Off and |
| in the printer. | connect the AC line cord and turn |
|
| the LVPS On. |
|
| CAUTION: Before checking fuse F1 |
|
| turn the LVPS Off and disconnect |
|
| the AC line cord. Check fuse F1. If |
|
| the fuse is blown, replace the LVPS. |
|
|
|
8 | LVPS | Remove the LVPS from the machine: |
|
| CAUTION: Before making any |
|
| measurements on the LVPS output |
|
| connector, observe all necessary |
|
| safety precautions before applying |
|
| AC power. Measure the voltage on |
|
| LVPS output connector CN3. The |
|
| voltage measures +5 V dc. If |
|
| incorrect, replace the LVPS. |
|
|
|
