4059-XXX
| FRU | Action |
|
|
|
1 | Erase Lamp Assembly | Check the erase lamp lens assembly |
|
| for any signs of paper dust, toner |
|
| buildup or any other contamination. |
|
| Clean with a soft cloth or replace the |
|
| lens and lamp assembly which are |
|
| provided together in a kit. If the lens |
|
| is clean then check the erase lamp |
|
| assembly for failed erase lamps. If |
|
| defective, replace the erase lamp |
|
| assembly. |
|
|
|
2 | Fuser Assembly | Check the fuser assembly for signs |
|
| of toner contamination. The hot roll |
|
| especially might cause toner to be |
|
| retained and deposited on the page. |
|
|
|
Print Quality - Light Print |
|
| FRU | Action |
|
|
|
1 | Transfer Roll | Check the right end of the transfer |
|
| roll shaft for signs of wear or |
|
| contamination. If incorrect, replace |
|
| the transfer roll. |
|
|
|
2 | Right Side Transfer Roll | Check the right side transfer roll arm |
| Arm Assembly | assembly bearing for any signs of |
|
| wear or contamination. Also check to |
|
| ensure the transfer cable is firmly |
|
| attached to the bearing. If incorrect, |
|
| replace the right side transfer arm |
|
| assembly. Check the connection of |
|
| the transfer roll assembly cable to |
|
| the transformer on the HVPS board. |
|
| Check the continuity of the cable |
|
| from the bearing to the spade |
|
| terminal on the cable. If incorrect, |
|
| replace the right side transfer arm |
|
| assembly. If correct, replace the |
|
| HVPS. |
|
|
|