Lexmark 4059-XXX manual Engine Board, EP Frame Assembly

4059-XXX

Engine Board

1.Remove the inner EMC shield.

2.Disconnect all cables from the engine board.

3.Remove the four engine board mounting screws (A).

4.Remove the engine board cage mounting screw (B) from the main drive motor assembly.

5.Remove the engine board.

Note: Anytime the engine board is replaced, the Configuration ID must be reset in NVRAM on the new engine board. Go to “Setting Configuration ID” on page 3-20.

EP Frame Assembly

1.Remove the left and right side frames.

2.Remove the EP frame assembly.

4-234059 Service Manual