4059-XXX
High Voltage Power Supply
1.Remove the inner paper deflector.
2.Remove the toner sensor cable from the retainer (A) on the front of the HVPS.
3.Remove the right side cover.
4.Disconnect the JVPS cable from the HVPS at connector (C).
5.Disconnect the transfer roll cable from the HVPS board. Note: Use caution when disconnecting the cable from the transformer on the HVPS. The cable and connector can be easily damaged.
6.Remove the HVPS mounting screw (B).
7.Slide the HVPS to the left to release the mounting tab and remove the HVPS.
Repair Information
