4059-XXX
| FRU | Action |
|
|
|
4 | Output Expander Control | Check the voltages at connector J4. |
| Board Level 1 | Go to “Output Expander Control |
|
| Board - Level 1 Stepper Motor” on |
|
| page |
|
| Printer idle |
|
| |
|
| |
|
| |
|
| |
|
| Printer Feeding Paper |
|
| |
|
| |
|
| |
|
| |
|
| The voltage drops to approximately |
|
| +16 V dc as the output expander bin |
|
| stepper motor turns on and a sheet |
|
| of paper is fed through the redrive |
|
| into the output expander assembly. If |
|
| any of the voltages fail to change, |
|
| replace the output expander option |
|
| board. If that does not correct the |
|
| problem, replace the output |
|
| expander mechanical linkage |
|
| assembly. |
|
|
|