Citizen Systems CT-S2000L user manual Features, Error Indication, Manual Setting of Memory Switch

LINE THERMAL PRINTER

MODEL CT-S2000L/CT-S2000DCL

User’s Manual

Refer to CT-S2000/CT-S2000DC User’s Manual of standard model when reading this manual.

Contents

1.1Features

4.6Error Indications

5.3Manual Setting of Memory Switch

5.4Selecting Paper Type

5.5Adjusting the Sensitivity of Paper Sensor

5.6Printing Paper

CITIZEN is a registered trade mark of Citizen Holdings Co., Japan

CITIZEN es una marca registrada de Citizen Holdings Co., Japón

Company names and product names in this manual are trademarks or

registered trademarks of relevant companies.

Copyright c 2007 by CITIZEN SYSTEMS JAPAN CO., LTD.

1.1 Features

●High-speed printing at a maximum of 220 mm/s is possible (* 154 mm/s at standard density on label paper).

●Usable with label paper of 57.5 mm, 59.5 mm, and 79.5 mm wide other than 82.5 mm wide.

●Automatic adjustment of paper sensor sensitivity is available.

4.6 Error Indication

The following LED indications are added to CT-S2000L/CT-S2000DCL.

Status	POWER LED	ERROR LED	Buzzer
Wait for cutting label	OFF
Paper detection error	OFF

5.3 Manual Setting of Memory Switch

Functions of memory switches SW4-1, SW4-2, SW4-4, SW4-5 and SW4-6 of CT-S2000L/ CT-S2000DCL are as shown below. (The white-on-black characters are factory setting.)

Memory Switch	Function	0 (OFF)		1 (ON)
SW4-1	Paper Length Setting			Command
		Auto Measure
SW4-2	Top of Form at Power ON				Valid
			Invalid
SW4-4	Paper Select	Thermal Roll
				BM.P/Lbl.P *
SW4-5	Position Detect	Black Mark
					Label
SW4-6	Paper Change				Valid
			Invalid

*When printing on label paper, adjust the layout so that right and left margins are 4 mm or more.

*The memory switch SW4-8 will be ignored for black mark paper.

*The memory switches SW2-8 and SW4-8 will be ignored for label.

5.4 Selecting Paper Type

Paper type selection is available by the combination of memory switches SW4-4 and SW4-5 by the used of “Memory Switch Select Mode”. In addtion, the following procedure is available.

1 Enter Selecting Paper Type mode.

1)Open the printer cover and remove paper. Pressing and holding the FEED button, turn the printer power ON. The POWER LED starts blinking.

2)Release the FEED button and then close the printer cover. Buzzer sounds and the paper type currently set is indicated by the LED on the operation panel.