•Do not put hands or feet near or under rotating parts. Keep clear of the discharge opening and front auger area at all times.

•Exercise extreme caution when operating on or cross- ing gravel drives, walks or roads. Stay alert for hidden hazards or traffic.

•After striking a foreign object, stop the engine (motor), remove wire from the spark plug, thoroughly inspect snow thrower for any damage, and repair the damage before restarting and operating the snow thrower.

•If the unit should start to vibrate abnormally, stop the engine (motor) and check immediately for the cause. Vibration is generally a warning of trouble.

•Stop the engine (motor) whenever you leave the oper- ating position, before unclogging the auger/impeller housing or discharge chute and when making any repairs, adjustments, or inspections.

•When cleaning, repairing, or inspecting, make certain all controls are disengaged and the auger/impeller and all moving parts have stopped. Disconnect the spark plug wire and keep the wire away from the spark plug to prevent accidental starting.

•Take all possible precautions when leaving the snow thrower unattended.Disengage the auger/impeller, stop engine (motor), and remove key.

•Do not run the engine (motor) indoors, except when starting the engine (motor) and for transporting the snow thrower in or out of the building. Open the outside doors.

WARNING: Exhaust fumes are dan- gerous (containing CARBON MONOX- IDE, an ODORLESS and DEADLY GAS).

•Do not clear snow across the face of slopes. Exercise extreme caution when changing direction on slopes. Do not attempt to clear steep slopes.

•Never operate the snow thrower without proper guards, plates or other safety protective devices in place.

•Never operate the snow thrower near glass enclo- sures, automobiles, window wells, drop–offs, and the like without proper adjustment of the snow discharge angle. Keep children and pets away.

•Do not overload the machine capacity by attempting to clear snow at too fast a rate.

•Never operate the machine at high transport speeds on slippery surfaces. Look behind and use care when backing up.

•Never direct discharge at bystanders or allow anyone in front of the unit.

•Disengage power to the auger/impeller when snow thrower is transported or not in use.

•Use only attachments and accessories approved by the manufacturer of the snow thrower (such as wheel weights, counterweights, cabs, tire chains, electric start kits, etc.).

•Never operate the snow thrower without good visibility or light. Always be sure of your footing and keep a fi rm hold on the handles. Walk; never run.

•Do not overreach. Keep proper footing and balance at all times.

•This snow thrower is for use on sidewalks, driveways and other ground level surfaces.

•Do not use the snow thrower on surfaces above ground level such as roofs of residences, garages, porches or other such structures or buildings.

MAINTENANCE AND STORAGE

•Check shear bolts and other bolts at frequent intervals for proper tightness to be sure the equipment is in safe working condition.

•Never store the snow thrower with fuel in the tank inside a building where ignition sources are present such as hot water and space heaters, clothes dryers, and the like. Allow the engine (motor) to cool before storing in any enclosure.

•Always refer to operator’s guide instructions for im- portant details if the snow thrower is to be stored for an extended period.

•Maintain or replace safety and instruction labels, as necessary.

•Run the snow thrower, with auger engaged, a few minutes after throwing snow to clear the machine and prevent freeze-up of the auger/impeller.

CONGRATULATIONS on your purchase of a new snow thrower. It has been designed, engineered and manufactured to give best possible dependability and performance.

Should you experience any problem you cannot easily remedy, please contact your nearest authorized service center/department. We have competent, well-trained tech- nicians and the proper tools to service or repair this unit.

Please read and retain this manual. The instructions will enable you to assemble and maintain your snow thrower properly. Always observe the “SAFETY RULES”.

SERIAL NUMBER: ___________________________

DATE OF PURCHASE: _______________________

THE MODEL AND SERIAL NUMBERSWILL BE FOUND ON A DECAL ATTACHEDTOTHE REAR OFTHE SNOW THROWER HOUSING.

YOU SHOULD RECORD BOTH SERIAL NUMBER AND DATE OF PURCHASE AND KEEP IN A SAFE PLACE

FOR FUTURE REFERENCE.

3

PRODUCT SPECIFICATIONS

Gasoline Capacity

4.0 Quarts

and Type:

Unleaded Regular only

 

 

Oil Type

SAE 30 (above 40°F)

(API SG–SL):

SAE 5W-30 or 10W-30 (0° to +40°F)

 

SAE 0W-30 (below 0°F)

 

 

Oil Capacity:

26 Ounces

 

 

Spark Plug:

Champion RJ19LM (Gap: .030")

 

 

CUSTOMER RESPONSIBILITIES

•Read and observe the safety rules.

•Follow a regular schedule in maintaining, caring for and using your snow thrower.

•Follow the instructions under “Maintenance” and “Stor- age” sections of this owner’s manual.

Page 2 Page 4
Page 3
Image 3
Husqvarna 8524STE owner manual Maintenance and Storage, Api Sg-Sl
Page 2 Page 4

8524STE specifications

The Husqvarna 8524STE is a top-tier snowblower designed for both efficiency and user-friendly operation. This powerful machine is engineered to tackle heavy snowfall, making it an essential tool for homeowners in winter climates.

One of the standout features of the Husqvarna 8524STE is its robust 24-inch clearing width. This wide design allows users to clear large areas quickly and effectively. Equipped with a powerful 208cc engine, the snowblower delivers exceptional performance, ensuring reliable starting in cold temperatures and a high throwing distance for snow.

The Husqvarna 8524STE employs a dual-stage snow removal system, which combines both an auger and an impeller. This two-step process allows for the efficient intake and powering of snow into the chute for dispersal at a significant distance. The heavy-duty steel auger can cut through compacted snow and ice, reducing the effort required by the user.

Another notable technology featured in the Husqvarna 8524STE is its electric start system. This allows for easy and quick starting with the push of a button, eliminating the hassle of manual pull starts, especially in frigid temperatures. Additionally, the snowblower features a friction disc transmission that offers six forward speeds and two reverse speeds, enabling users to adjust their pace according to their specific snow-clearing needs.

Comfort is also a priority with this model. The ergonomic handle is designed for better grip, and the controls are well-placed for ease of use. The handle height can be adjusted to accommodate different user heights, ensuring that everyone can operate the machine comfortably.

The Husqvarna 8524STE further enhances its usability with a chute rotation that can be easily adjusted from the operator’s position. This feature provides precise control over the direction in which the snow is thrown, allowing users to clear their driveways, sidewalks, and walkways efficiently.

For added safety, the snowblower includes features such as a transparent fuel tank for easy monitoring of fuel levels and LED headlights for increased visibility during nighttime operations.

In summary, the Husqvarna 8524STE combines powerful performance with user-friendly features. Its durable construction, advanced technologies, and thoughtful design make it one of the best choices on the market for those looking to tackle winter's challenges. Whether you face heavy snowfalls or light flurries, this snowblower is built to handle it all with ease and efficiency.
Top Page Image Contents