Agilent Technologies 5000 Series manual TRIGgerMODE, Return Format modeNL

Commands by Subsystem 3

:TRIGger:MODE

(see page 530)

Command Syntax :TRIGger:MODE <mode>

1234567890123456789012345678901234567890123456789012345678901234567890 <mode> ::= {EDGE GLITch PATTern CAN DURation IIC LIN SPI

TV USB FLEXray UART}

The :TRIGger:MODE command selects the trigger mode (trigger type).

Query Syntax :TRIGger:MODE?

The :TRIGger:MODE? query returns the current trigger mode. If the :TIMebase:MODE is ROLL or XY, the query returns "NONE."

Return Format <mode><NL>

<mode> ::= {NONE EDGE GLITch PATTern CAN DURation IIC LIN SPI TV USB FLEXray UART}

See Also • "Introduction to :TRIGger Commands" on page 313

•":TRIGger:SWEep" on page 323

•":TIMebase:MODE" on page 304

Example Code ' TRIGGER_MODE - Set the trigger mode to EDGE, GLITch, PATTern, CAN,

'DURation, IIC, LIN, SPI, TV, USB, FLEXray, or UART.

'Set the trigger mode to EDGE.

myScope.WriteString ":TRIGGER:MODE EDGE"

Example program from the start: "VISA COM Example in Visual Basic" on page 578

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 319