Manuals / Acroprint / Household Appliance / Electric Heater

Acroprint ES700 user manual Specifications, Use only the supplied AC Adapter with this unit

Models: ES700

1 48

Page 43

SPECIFICATIONS

Clock Accuracy	Monthly accuracy ± 15 sec. (at ordinary temperatures)

Calendar	Year up to 2099. Automatically adjusted to leap years, 31-day
	months and months with 30 or fewer days, and the days of the
	week.

Printing System	Dot matrix

Power Failure	Five years of cumulative power failure hours after the date of
Compensation	shipment.

Operating Environment	Temperature: -5° to +45°C, +25° to +113°F
	Humidity: 20 to 80%, no condensation
	The unit operates normally at temperatures of 5°C (25°F) or
	below, but the print density and reaction of the liquid crystal
	display are inferior to those at normal temperature operation.

Dimensions	6.45" (w) x 5.63" (h) x 6.77" (d)
	164 (w) x 143 (h) x 172 (d) mm

Weight	Approx. 4.4 lbs. with AC Adapter (2.0 kg with AC Adapter)

Rating	AC Adapter:
	I/P 120 VAC 60 Hz
	O/P 15 V 1300 mA

Use only the supplied AC Adapter with this unit.

ES700 User’s Manual

Page 43

Image 43

Acroprint ES700 user manual Specifications, Use only the supplied AC Adapter with this unit

Contents

ES700 Serial Number label for bottom of clock 6Table of Contents Reset Factory Default Settings ALERT DEFINITIONS PRECAUTIONS INTRODUCTION FEATURESES700 Manual ES700Factory Installed EQUIPMENTOpen Unit Open and Close UnitOpen Unit Close Unit Close Unit3URWHFWLYH3DG &DUGERDUG,QVHUW Power the Unit Power the Unit/Print PositioningPrint Position on Time Card IMPORTANT THINGS TO REMEMBER WHEN USING THE ES700 Turn DST OFF Automatically Receive Atomic SignalAtomic Synchronization Set Time Zone -5EST, -6CST, -7MST, -8PSTES-05 Atomic Synchronization Time Zones Default = ES-05Time Recorder Menu PROGRAM THE TIME RECORDERTime Recorder Function Buttons Change Minute TimeSETTINGS Change HourYear Month Date DateChange Year Change MonthHour Display Options 12/24 Hour FormatChange Date Change Hour3.Refer to Print Order Options on page Print OrderChange Year Digit Year DigitPrint Order Options Type of Hour Options Hour/MinuteChange Hour/Minute Year Digit OptionsType of Minute Options Change Leading Zero Leading ZeroLeading Zero Options Preset Comment Options Preset CommentsChange Comment Options Language Options LanguagePrint Length Examples Print LengthChange Print Direction Print MethodPrint Direction Options Print Activation Options Change Print ActivationPress Push Bar 2 AM Daylight Saving Time DSTStart Date Manually Setting DSTChange the Year SELECT Change the MonthSELECT DST START CHANGE SETChange the Year Change the Date2.Press SET End DateChange the Month Set PasswordChange the Date 2.Press SET Change the First Two DigitsChange the Last Two Digits 2. The first two digits flashSet the Last Two Digits Enter PasswordCancel the Password Set the First Two DigitsPress Reset Button RESET FACTORY DEFAULT SETTINGSReset button Factory Default Settings WALL MOUNTING Install Wall-MountScrewsHang Unit Remove Ribbon Cassette REPLACING THE RIBBON CASSETTETighten Ribbon Cassette Install Ribbon Cassette 6. Close the unit. Refer to “Close Unit” on page Tighten Ribbon CassetteError No. Appears TROUBLESHOOTINGOther Failures Use only the supplied AC Adapter with this unit SPECIFICATIONSPage ES700 Product Registration CardCut Here Page Page 919.872.5800 800.334.7190 in USA 5640 Departure Drive Raleigh, NC 27616 USAP/N 06-0365-000Rev. B