Change the Month
1.In this example, press CHANGE until the month is "11" (November). Refer to DST on page 23.
2.Press SET.
3.The flashing changes from "Month" to "Date".
SELECT
DST
END
CHANGE 
SET
Change the Date
1.In this example, press CHANGE until the date is "02". Refer to DST on page 23.
2.Press SET.
3.The "Ending Date" of the display changes from flashing to steady and the S mark is displayed under "SU".
SU
SELECT
DST
END
CHANGE 
SET
Set Password
Once the password is set, you must enter it before changing any settings. Refer to “Enter Password” on page 29.
You may choose any
Numbers "0000" and "9999" are not valid passwords.
All settings must be reset if you forget the password. Refer to “Reset Factory Default Settings” on page 30.
Example: Set the Password to "1234".
1. Press SELECT until the T is above the "PASSWORD" mark.
ES700 User’s Manual | 27 |
