Program the Time Recorder, Time Recorder Menu | Acroprint ES700

PROGRAM THE TIME RECORDER

Most of the procedures in this manual are performed from the Time Recorder menu. Refer to Time Recorder Menu below. Refer to Time Recorder Function Buttons below.

Press SELECT. The unit changes into the program mode showing S on the display positioned under the "TIME" mark.

	Time Recorder Menu
	Time Recorder Function Buttons

CONTROL	FUNCTION

SELECT	Press SELECT to choose the desired program setting mode. The selected
	program mode is indicated by S on the display.

CHANGE	Press CHANGE to cycle through the options.

SET	Press SET to set the option. After an option has been set, always press SET
	again to return the unit to normal operation mode.

ES700 User’s Manual

9

Image 15

Acroprint ES700 user manual Program the Time Recorder, Time Recorder Menu, Time Recorder Function Buttons

Contents

ES700 Table of Contents Page Alert Definitions Precautions Introduction Features Equipment ES700 Open Unit Open and Close Unit Close Unit Close Unit Power the Unit/Print Positioning Power the UnitPrint Position on Time Card Important Things to Remember When Using the ES700 Turn DST OFF Automatically Receive Atomic SignalAtomic Synchronization Set Time Zone -5 EST, -6 CST, -7 MST, -8 PST ES-05 Atomic Synchronization Time Zones Default = ES-05 Program the Time Recorder Time Recorder MenuTime Recorder Function Buttons Change Minute SettingsTime Change Hour Date Change YearChange Month 12/24 Hour Format Change DateHour Display Options Refer to Print Order Options on Print Order Year Digit Change Year DigitPrint Order Options Type of Hour Options Hour/MinuteChange Hour/Minute Year Digit Options Type of Minute Options Leading Zero Change Leading ZeroLeading Zero Options Preset Comments Preset Comment OptionsChange Comment Options Language Options Language Print Length Examples Print Length Print Method Change Print DirectionPrint Direction Options Change Print Activation Print Activation OptionsPress Push Bar DST Daylight Saving Time DST Example Manually Setting DST Change the Month End Date Set Password Change the Last Two Digits Change the First Two Digits Set the Last Two Digits Enter PasswordCancel the Password Set the First Two Digits Press Reset Button Reset Factory Default Settings Rcvd Factory Default Settings Install Wall-Mount Screws Wall MountingHang Unit Replacing the Ribbon Cassette Remove Ribbon CassetteTighten Ribbon Cassette Install Ribbon Cassette Between Print Head and Ribbon Mask Install Ribbon Cassette Close the unit. Refer to Close Unit on Troubleshooting Error No. AppearsOther Failures Specifications Page Product Registration Card Page Page Departure Drive Raleigh, NC 27616 USA 919.872.5800