SpecificationsAssembly
Electrical Input | 120 V~ / 60 Hz / 6.3 A (Rated) |
|
|
Motor Speed | |
|
|
Chuck Capacity | 1/2” (13mm) |
|
|
Approximate | 3/4” Wood |
Work Capacity | 1/2” Metal |
| 90SM |
| E194601 |
| BQ |
Unpacking
When unpacking, make sure that the item is intact and undamaged. If any parts are missing or broken, please call Harbor Freight Tools at
Thread the auxiliary handle securely into the left or right side of the drill.
|
|
|
| Functions | |
Chuck |
| Lock |
Ring |
| Button |
Chuck
Key Hole
Chuck
Jaws
Auxiliary Trigger
Handle
Direction
Switch Key
Holder
Instructions for putting into use
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
To prevent serious injury
from accidental operation:
Disengage the Trigger and unplug the tool from its electrical outlet before assembling or making any adjustments to the tool.
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
Operating Instructions
Read the entire Important Safety Information section at the beginning of this manual including all text under subheadings therein before set up or use of this product.
Tool Set Up
To prevent serious injury
from accidental operation:
Disengage the Trigger and unplug the tool from its electrical outlet before adjusting tool or installing accessories.
To install a drill bit:
1.Insert the Chuck Key into the Chuck Key Hole and turn it counterclockwise to open the Chuck Jaws.
REV10f
SKU 3273 | For technical questions, please call | Page 9 |
