Page 4For technical questions, please call 1-800-444-3353.SKU 3273
electrical safety2.
power tool plugs must match the a. outlet. never modify the plug in
any way. do not use any adapter
plugs with grounded power tools.
Unmodied plugs and matching
outlets will reduce risk of electric
shock.
avoid body contact with grounded b. surfaces such as pipes, radiators,
ranges and refrigerators. There is
an increased risk of electric shock if
your body is grounded.
do not expose power tools to rain c. or wet conditions. Water entering
a power tool will increase the risk of
electric shock.
do not abuse the cord. never use d. the cord for carrying, pulling or
unplugging the power tool. keep
cord away from heat, oil, sharp
edges or moving parts. Damaged
or entangled cords increase the risk
of electric shock.
when operating a power tool e. outdoors, use an extension cord
suitable for outdoor use. Use
of a cord suitable for outdoor use
reduces the risk of electric shock.
if operating a power tool in a f. damp location is unavoidable, use
a ground Fault circuit interrupter
(gFci) protected supply. Use of
a GFCI reduces the risk of electric
shock.
personal safety3.
Stay alert, watch what you are a. doing and use common sense
when operating a power tool. do
not use a power tool while you
are tired or under the inuence
of drugs, alcohol or medication.
A moment of inattention while
operating power tools may result in
serious personal injury.
use personal protective b. equipment. always wear eye
protection. Safety equipment such
as dust mask, non-skid safety shoes,
hard hat, or hearing protection used
for appropriate conditions will reduce
personal injuries.
prevent unintentional starting. c. ensure the switch is in the off-
position before connecting to
power source and/or battery pack,
picking up or carrying the tool.
Carrying power tools with your nger
on the switch or energizing power
tools that have the switch on invites
accidents.
Remove any adjusting key or d. wrench before turning the power
tool on. A wrench or a key left
attached to a rotating part of the
power tool may result in personal
injury.
do not overreach. keep proper e. footing and balance at all times.
This enables better control of the
power tool in unexpected situations.
dress properly. do not wear f. loose clothing or jewelry. keep
your hair, clothing and gloves
away from moving parts. Loose
clothes, jewelry or long hair can be
caught in moving parts.
if devices are provided for the g. connection of dust extraction and
collection facilities, ensure these
are connected and properly used.
Use of these devices can reduce
dust-related hazards.
Only use safety equipment h. that has been approved by an