Agilent Technologies 5000 Series manual TRIGgerNREJect, Query Syntax

3Commands by Subsystem

:TRIGger:NREJect

	(see page 530)
Command Syntax	:TRIGger:NREJect <value>
	<value> ::= {{0 OFF} {1 ON}}
	The :TRIGger:NREJect command turns the noise reject filter off and on.
	When the noise reject filter is on, the trigger circuitry is less sensitive to
	noise but may require a greater amplitude waveform to trigger the
	oscilloscope. This command is not valid in TV trigger mode.
Query Syntax	:TRIGger:NREJect?
	The :TRIGger:NREJect? query returns the current noise reject filter mode.
Return Format	<value><NL>
	<value> ::= {0 1}
See Also	• "Introduction to :TRIGger Commands" on page 313

320 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference