Agilent Technologies 5000 Series manual CHANnelnBWLimit, Introduction to CHANneln Commands on

Commands by Subsystem 3

:CHANnel<n>:BWLimit

(see page 530)

Command Syntax :CHANnel<n>:BWLimit <bwlimit> <bwlimit> ::= {{1 ON} {0 OFF}

<n> ::= {1 2 3 4} for the four channel oscilloscope models <n> ::= {1 2} for the two channel oscilloscope models

	The :CHANnel<n>:BWLimit command controls an internal low- pass filter.
	When the filter is on, the bandwidth of the specified channel is limited to
	approximately 25 MHz.
Query Syntax	:CHANnel<n>:BWLimit?
	The :CHANnel<n>:BWLimit? query returns the current setting of the
	low- pass filter.
Return Format	<bwlimit><NL>
	<bwlimit> ::= {1 0}
See Also	• "Introduction to :CHANnel<n> Commands" on page 143

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference 145