Agilent Technologies 5000 Series manual SBUSIICASIZe, TRIGgerIIC Commands on

3Commands by Subsystem

:SBUS:IIC:ASIZe

Command Syntax

N O T E

(see page 530)

:SBUS:IIC:ASIZe <size>

<size> ::= {BIT7 BIT8}

The :SBUS:IIC:ASIZe command determines whether the Read/Write bit is included as the LSB in the display of the IIC address field of the decode bus.

This command is only valid on 4 (analog) channel oscilloscope models when the low-speed IIC and SPI serial decode option (Option LSS) has been licensed.

Query Syntax	:SBUS:IIC:ASIZe?
	The :SBUS:IIC:ASIZe? query returns the current IIC address width setting.
Return Format	<mode><NL>
	<mode> ::= {BIT7 BIT8}
Errors	• "- 241, Hardware missing" on page 501
See Also	• "Introduction to :SBUS Commands" on page 277
	• ":TRIGger:IIC Commands" on page 355

284 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference