Commands by Subsystem 3

:FUNCtion:RANGe

(see page 530)

Command Syntax :FUNCtion:RANGe <range>

<range> ::= the full-scale vertical axis value in NR3 format.

The :FUNCtion:RANGe command defines the full- scale vertical axis for the selected function.

Query Syntax :FUNCtion:RANGe?

The :FUNCtion:RANGe? query returns the current full- scale range value for the selected function.

Return Format <range><NL>

<range> ::= the full-scale vertical axis value in NR3 format.

The range for ADD, SUBT, MULT is 8E- 6 to 800E+3.

The range for the INTegrate function is 8E- 9 to 400E+3 (depends on sweep speed).

The range for the DIFFerentiate function is 80E- 3 to 8.0E12 (depends on sweep speed).

The range for the FFT (Fast Fourier Transform) function is 8 to 800 dBV.

See Also "Introduction to :FUNCtion Commands" on page 182

":FUNCtion:SCALe" on page 189

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference

187

Page 187
Image 187
Agilent Technologies 5000 Series manual FUNCtionRANGe, Return Format rangeNL