354 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference
3Commands by Subsystem
:TRIGger:GLITch:SOURce
(see page 530)
Command Syntax :TRIGger:GLITch:SOURce <source>
<source> ::= {CHANnel<n> | EXTernal}
<n>::={1|2|3|4}forthefour channel oscilloscope models
<n> ::= {1 | 2} for the two channel oscilloscope models
The :TRIGger:GLITch:SOURce command selects the channel that produces
the pulse width trigger.
Query Syntax :TRIGger:GLITch:SOURce?
The :TRIGger:GLITch:SOURce? query returns the current pulse width
source. If all channels are off, the query returns "NONE."
Return Format <source><NL>
See Also •"Introduction to :TRIGger Commands" on page 313
•":TRIGger:MODE" on page 319
•":TRIGger:GLITch:LEVel" on page 350
•":TRIGger:GLITch:POLarity" on page 351
•":TRIGger:GLITch:QUALifier" on page 352
•":TRIGger:GLITch:RANGe" on page 353
Example Code •"Example Code" on page 346