Agilent Technologies 5000 Series manual SYSTemDSP, See Also Introduction to SYSTem Commands on

3Commands by Subsystem

:SYSTem:DSP

(see page 530)

Command Syntax :SYSTem:DSP <string>

<string> ::= quoted ASCII string (up to 254 characters)

The :SYSTem:DSP command writes the quoted string (excluding quotation marks) to a text box in the center of the display. Use :SYStem:DSP "" to remotely remove the message from the display. (Two sets of quote marks without a space between them creates a NULL string.) Press any menu key to manually remove the message from the display.

See Also • "Introduction to :SYSTem Commands" on page 294

296 Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference