Commands by Subsystem 3

:TRIGger:UART:BURSt

(see page 530)

Command Syntax :TRIGger:UART:BURSt <value>

<value> ::= {OFF 1 to 4096 in NR1 format}

The :TRIGger:UART:BURSt command selects the burst value (Nth occurrence of trigger event after idle period) in the range 1 to 4096 or OFF, for the trigger when in UART mode.

Query Syntax :TRIGger:UART:BURSt?

The :TRIGger:UART:BURSt? query returns the current UART trigger burst value.

Return Format <value><NL>

<value> ::= {OFF 1 to 4096 in NR1 format}

See Also "Introduction to :TRIGger Commands" on page 313

":TRIGger:MODE" on page 319

":TRIGger:UART:IDLE" on page 393

":TRIGger:UART:TYPE" on page 399

Agilent InfiniiVision 5000 Series Oscilloscopes Programmer's Reference

391

Page 391
Image 391
Agilent Technologies 5000 Series manual TRIGgerUARTBURSt, Return Format valueNL